You are here

Interpreting Your Soil Test Report — For Homeowners

Publication Number: P3825
View as PDF: P3825.pdf

Targeted to homeowners or producers of crops grown

over a small area – units in pounds per 1,000 square feet

 

Step 1: Do you need lime?

The most important information the soil test provides is based on the pH of your soil. If the pH is too low for the crop you are growing, we will recommend an application of lime. This application should come before any fertilizer is added (preferably about 2 months) to allow the liming material to raise the pH to an optimal level for your crop. If your soil sample does not call for a lime recommendation (as in the sample soil test report), move on to the next step.

Step 2: Calculate the amount of fertilizer required

The nitrogen recommendation in the sample soil test report calls for 1 pound per 1,000 square feet. Suppose you want to use 13-13-13 fertilizer, which is 13 percent nitrogen. First, convert the percentage of the nitrogen source to a decimal (for example, 13 percent = 0.13). Now, divide into the recommended amount listed on the report: 1 ÷ 0.13 = 8 pounds of 13-13-13 per 1,000 square feet.

Using 13-13-13 would also supply 1 pound of potassium in this example. While the recommendations call for 1.8 pounds per 1,000 square feet in the example (less than the 1 pound provided by triple 13), we do not recommend adding additional 13-13-13.

Calculate the square feet required for your lawn or garden. Then scale the fertilizer recommendation to your area. For example, if your lawn area is 4,000 square feet, you will need four times the recommended amount of fertilizer. If your area is only 100 square feet, divide the total fertilizer required by 10.

""

Additional Information

The second page of the soil test report contains additional details about your sample. Units for elements tested are in pounds per acre (ppa). Of particular interest are phosphorous and potassium: green bars indicate additional fertilizer will probably not result in additional plant growth or yield; yellow bars indicate a plant response may or may not occur; and red bars indicate additional fertilizer will likely result in increased plant growth or yield.

What about nitrogen measurements? Plants require specific forms of nitrogen that are tricky to measure in the lab. Additionally, nitrogen is so mobile in the soil, measurement of current values would not be very helpful for predicting a nitrogen recommendation. Therefore, MSU Extension recommendations are based on research.

""

The information given here is for educational purposes only. References to commercial products, trade names, or suppliers are made with the understanding that no endorsement is implied and that no discrimination against other products or suppliers is intended.


Publication 3825 (POD-10-22)

By Keri Jones, Laboratory Coordinator, Plant and Soil Sciences.

Department: Plant and Soil Sciences
Print Friendly, PDF & Email

The Mississippi State University Extension Service is working to ensure all web content is accessible to all users. If you need assistance accessing any of our content, please email the webteam or call 662-325-2262.

Authors

Portrait of Dr. Keri Denley Jones
Laboratory Coordinator
Soil Testing Lab

Your Extension Experts

Portrait of Dr. Shaun Robert Broderick
Assoc Extension/Research Prof
Portrait of Dr. Alan Henn
Extension Professor
Portrait of Dr. James Dewey McCurdy
Associate Professor