Disaster Relief: Clearing Debris from Land
You alone are responsible for clearing debris from your property after a damaging natural event.
Here are some guides for setting priorities for clearing debris from land after a severe storm:
- Land use and value—Clear streets and roads to allow emergency vehicles to pass freely. In yards and pastures, remove any lumber containing nails or other pieces of metal that could injure people and/or livestock. Pay special attention to avoid contact with downed electrical lines and other utilities.
- Equipment available—Power saws, tractors, bulldozers, and trucks can be used to move fallen trees. If you have access to small equipment only, remove tree roots and small limbs before attempting to clear the area.
- Type of debris—Different vegetation often requires different cleanup and salvage procedures. In woodlots and forests, experienced foresters should designate salvageable timber. You may need specialized equipment to clear large areas efficiently.
Here are some ways you can remove tree debris:
- Inspect damaged trees to see if salvage is a viable option. Contact an Extension horticulturist or forestry specialist for this work.
- Remove valuable trees before clearing debris.
- If possible, attach a root rake to the front of the bulldozer. This type of rake will let most of the soil pass through the teeth, reducing topsoil removal and the creation of undesirable mounds of soil in unwanted areas.
- If stump removal is desired and you plan to use bulldozers, leave stumps 6 to 10 feet high for leverage. If you use a stump grinder, remove trees at ground level.
You can bury tree debris, but it is expensive. Use a chipping machine for smaller branches to reduce the burial space you need.
You can put tree debris in eroded gullies (where the land is not practical for terracing) or in low-lying areas. Consult a water-resource specialist to determine how the landfill will change the water’s path. Typically a bulldozer or other large equipment is needed for this work. It can be dangerous to use smaller tractors to push debris into gullies.
Let trees dry to the point where foliage begins to fall off. Put debris in large compact piles a safe distance from surrounding structures or other flammables. Fuel oils may be necessary to ensure combustion. If so, exercise extreme caution and maintain a safe distance when igniting debris piles. Stoke piles and keep fire alive until all woody material is burned. In some areas, you may need a permit to burn debris. Burning may be prohibited in some communities because of smoke pollution. Burning may also be prohibited under burn bans when environmental factors result in unsafe burning conditions.
Remember, safety always comes first, and even if you are used to working with damaged or fallen timber, observe safety precautions to prevent injury or death.
- Stabilize ladders when pruning trees, or climb into trees to prune. Use a safety rope.
- Watch for falling limbs.
- Be careful of electric power lines. Leave extensive pruning around power lines to power companies. Wet limbs or soiled control ropes on pruning equipment can be hazardous. Do not use pruning equipment with metal handles.
- If you have never used a chain saw before, try to find someone with experience to help you after a disaster. If you are experienced with chain saws, observe all safety precautions. Use a sharp saw and shut it off even when moving only a few feet. Remember that you can’t shout or hear warnings when the saw is running.
- Clear the area before beginning to saw limbs or trees. Determine the direction the tree will fall. Try to limit felling trees into other trees. Plan an escape route in case the tree jumps off the stump when cut.
The Mississippi State University Extension Service is working to ensure all web content is accessible to all users. If you need assistance accessing any of our content, please email the webteam or call 662-325-2262.