You are here

Simplifying Southern Pine Thinning with Stand Density Index - Pine Thin: A Smartphone Application

Publication Number: IS2010
Updated: January 12, 2016
View as PDF: IS2010.pdf

Producing valuable sawtimber is often the primary objective of landowners managing pine plantations. To qualify as sawtimber, trees should possess a suite of desirable physical characteristics, including having a straight main stem that is limb-free and that has grown to at least 14 inches in diameter at breast height (DBH). Tree stems lacking one or more of these characteristics are often downgraded to pulp, which brings significantly lower stumpage prices.

Maintaining control over the growing environment is one of the best ways to develop sawtimber characteristics. At the beginning of the rotation, planting density is usually set to allow individual seedlings full access to light, moisture, and soil nutrients. This planting strategy facilitates the rapid expansion of seedling crown and root area, leading to favorable height and diameter development. Over time, however, growth rates begin to slow as the root and crown systems of neighboring trees begin to compete with one another for resources.

Competition among trees has mixed effects on tree stems. Competition for light initiates self-pruning of limbs, which encourages clear, defect-free wood development and straight vertical growth. Conversely, increased resource competition reduces vigor and diameter growth of individual trees. Slower growth can lengthen timber rotations and increase the susceptibility to southern pine beetle infestation.

Thinning to reduce tree density represents the ideal trade-off to this common problem. Thinning increases resource availability (water and soil nutrients) within a plantation by removing poorly formed or slower-growing trees that are likely to be lost to mortality. If performed correctly and in a timely manner, thinning can restore rapid growth rates to the remaining favorably formed crop trees. However, if thinning is applied at the wrong time or at the wrong intensity, it can result in plantations that are understocked and poorly formed or overstocked and growing slowly.

Many landowners recognize that thinning is an important step in plantation management. However, they struggle to decide when and how intensively they should thin. While this apprehension is understandable, making thinning decisions does not have to be a stressful endeavor. In fact, with the use of some basic forestry tools, appropriately prescribing a thinning operation can be a simple process.

Stand density index (SDI) is one tool that can simplify the thinning decision process. SDI is based on decades of research detailing how growth and survival is affected by competition between trees. SDI uses only the average number of trees per acre and the average DBH of trees in your plantation to determine whether your plantation is in need of a thinning. Specific density management diagrams have been developed for each of the four major southern pine species. Learning how to use these diagrams will improve your odds of avoiding southern pine beetle infestation and increase your likelihood of producing valuable sawtimber.

The Mississippi State University Extension Service offers a smartphone application that incorporates SDI to help determine if a pine planation is in need of thinning. Guide to Thinning Southern Pines (Pine Thin) is currently available through the Apple App Store. Pine Thin provides a graphical depiction of the density of a pine plantation and indicates whether or not the stand is in need of thinning. The line between well stocked and understocked (full site occupancy line) is also provided as a target density for the residual stand that should be left after thinning.

Guide to Forest Inventory Plots

Step 1. Walk into your pine plantation and randomly stop at a point. This point will become the center of your inventory plot. It may be helpful to set a chaining pin or stake in the ground to mark this location.

Step 2. From the plot center point, stretch a string or measuring tape to establish the plot radius or outer boundary for the plot (Figure 1). For a 100th-acre plot, the plot radius is 11 feet 9 inches, or 11.775 feet. For older pines, you may want to establish a 10th-acre plot, which has a 37.2-foot radius.

“In” trees are those trees located within the plot boundary. “In” trees should be measured using the procedures outlined in Step 3. “Out” trees are those located outside the plot boundary. These trees should NOT be measured. Trees located right on the boundary line can be either “in” or “out” depending on where the center of the tree is. See Figure 2 for help with boundary line trees.

Step 3. Measure the DBH of each “in” tree. To ensure each “in” tree is measured, mark your first tree and proceed measuring trees in a clockwise direction until the circle is complete. Record this information in the plot entry screen detailed in step 6 of the Guide to Thinning Southern Pines User Tutorial. This tutorial can be accessed from the main screen of the smartphone app by pressing the і in the lower right-hand corner.

Step 4. Repeat Steps 1–3 at four or more additional random locations throughout your stand. While your plots should be random, it is important to distribute your plots evenly across your property. This will help account for any site quality differences that may exist in your stand.

Figure 1. Depiction of a forest inventory plot. Plot center represents the random point at which you stopped. You may want to place a chaining pin to mark this location. From this spot, stretch a string or tape to either 11 feet 9 inches, or 11.775 feet, for a 100th-acre plot or 37.2 feet for a 10th-acre plot. This plot radius establishes a plot boundary. Measure and record the DBH of each tree that falls within the plot boundary.

Figure 2. Aerial view of a sample forest measurement plot (black circle) in a pine plantation. Gray and black circles are the aerial view of pine stems. Tree stems colored black are considered “in” the plot and should have their DBH measured and recorded. “In” trees include trees located right on the plot boundary line that have more than half of their diameter located inside the plot boundary (a). Trees colored gray are considered “out” of the plot and should not be measured or recorded. “Out” trees include trees located right on the plot boundary line with more than half of their diameter located outside the plot boundary (b).

The information given here is for educational purposes only. References to commercial products, trade names, or suppliers are made with the understanding that no endorsement is implied and that no discrimination against other products or suppliers is intended.

Information Sheet 2010

By John L. Willis, Assistant Professor, and James E. Henderson, Associate Extension Professor, Forestry.

Contact Your County Office

Your Extension Experts

Assistant Extension Professor
Extension Associate/Research MS PLM Program Coordinator MS Tree Farm Administrator MS SFI Coordina
Extension Professor
Forestry, Commercial, Urban
Extension Professor
Extension Professor - Forest Management, Forest Certification, Long-Leaf Pine Management
Extension/Research Professor
Agroforestry, Christmas trees, GIS, forest soils, pine silviculture
Extension/Research Professor
Hardwoods
Assistant Extension Professor
Hardwood Silviculture Forest Herbicides
Assistant Professor
Silviculture Restoration Silviculture

Related Publications